Call 08047314896 88% Response Rate

our range

Astral Adhesive

Providing you the best range of bondtite fast clear astral adhesive, bondtite pro astral adhesive and bondtite super strength astral adhesive with effective & timely delivery.
  • Bondtite Fast Clear Astral Adhesive
  • Bondtite Fast Clear Astral Adhesive
  • Bondtite Fast Clear Astral Adhesive
Bondtite Fast Clear Astral Adhesive

Bondtite Fast Clear Astral Adhesive

Rs 800  / pieceGet Best Price

Minimum Order Quantity: 50 piece

Product Brochure

ColorClear
BrandAstral
Packaging Size500g Set
Packaging TypeBox
StorageProduct should be stored in a dry place in their original, properly closed container
Application IndustryJointing
FormGel
StrengthHigh
Shelf Life2 years from the date of manufacturing.
Handling PrecautionsPlease consult the product safety data sheet
Pot Life5 mins
Description:
Bondtite Fast & Clear 
Bondtite Fast & Clear is a “5 min” high strength, two-component, transparent epoxy adhesive system. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and even to bond various substrates like metal, ceramic, wood, chrome, concrete, marble, glass, fiberglass, tiles etc. The curing time for Bondtite Fast & Clear is unaffected by temperature so even at lower temperatures, the pot life will be 5 minutes.

Applications

Bondtite Fast & Clear is a 5 min epoxy, so it can be used at those places where instant strength is required. It remains unaffected to mild alkalis, acids, etc. It is a non-toxic, electrically insulating adhesive which does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.

Advantages
  • Clear & transparent bond
  • High strenght
  • Bond multiple substates
  • Solvent free

How to use
  • Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
  • Wash glass and ceramic surfaces with soap and water then rinse and let dry.
  • Pre-fit parts to be joined.
  • Squeeze equal volumes of the material from both part-A & part-B. Mix  part-A & part-B for one minute thoroughly and then apply as per requirement.
  • Clamp it for 30 minutes.                                
  • Full Strength will be achieved  in 4 hours
Restriction of usage
  • Does not bond to polyethylene or polypropylene plastics
  • Applications requiring short-term heat exposure of greater than 150°C
  • Continuously wet areas or water immersion
  • Portable water systems
  • Do not use on areas that will come in contact with food related items

View Complete details

get quote request a call back
  • Bondtite Pro Astral Adhesive
  • Bondtite Pro Astral Adhesive
  • Bondtite Pro Astral Adhesive
Bondtite Pro Astral Adhesive

Bondtite Pro Astral Adhesive

Rs 1,600  / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Brochure

StorageCool place
Shelf Life2 Years from the date of manufacturing
Packaging Size1.8 kg Set
Usage/ApplicationFixing name plates, bonding steel body to grinding stone in wet grinder, for assembly of mixers, was
BrandAstral
Packaging TypeBottle
FormGel
StrengthHigh
Grade StandardIndustrial Grade
Chemical CompositionEpoxy
Bondtite Pro

Bondtite PRO is the most advanced, new generation, high performance, room temperature curing, two-component epoxy adhesive system. It has an extremely high impact resistance as well as shear strength. Also, it provides higher coverage compared to standard epoxy adhesives and is suitable for external applications due to its all weather and UV resistance. Moreover, it also offers less clamping time and more pot life making it suitable for large surface applications and increased productivity. Bondtite PRO can be used for bonding various similar and dissimilar materials such as metals, ceramics wood, leather, rubber, marble, glass, etc.

Applications
  • Fixing of marble & granites in kitchen, bathroom, and window frames
  • Assembly of any marble item like in temples, wash basin, etc.
  • Handicraft applications
  • Wood working like wood to wood, wood to marble and wood to glass bonding
  • Grouting of railings
  • Handicraft applications
  • Speaker manufacturing & repair
Advantages
  • High bonding strength
  • All Weather & UV Resistance
  • 7 times more Impact & vibration resistance than Standard Epoxy Adhesives
  • 20% more coverage than standard epoxy, leading to reduce application cost
  • 75 mins. pot life at  250 C (100 gm mass)
  • Holding strength in just 4 hours
  • More Productivity due to fast setting time
How to use

Surfaces must be clean, dry, and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth. Wash glass and ceramic surfaces with soap and water then rinse and let dry. Pre-fit parts to be joined. Squeeze equal volume of material from both part-A & part-B. Mix resin and hardener for one minute thoroughly and then apply as per requirement. Clamp both the surfaces for 4 hrs. Leave it for 24 hours to achieve optimum strength.

Storage

Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.

Handling precautions

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastics products”.

View Complete details

get quote request a call back
  • Bondtite Super Strength Astral Adhesive
  • Bondtite Super Strength Astral Adhesive
  • Bondtite Super Strength Astral Adhesive
  • Bondtite Super Strength Astral Adhesive
Bondtite Super Strength Astral Adhesive

Bondtite Super Strength Astral Adhesive

Rs 1,050  / pieceGet Best Price

Minimum Order Quantity: 50 piece

BrandAstral
Packaging Size450g Set
Packaging TypeBox
StorageProduct should be stored in a dry place in their original, properly closed container
Shelf Life2 Years from the date of manufacturing
FormGel
StrengthHigh
ColorWhite
Handling PrecautionsPlease consult the product safety data sheet
Description:
Bondtite Super Strength

Bondtite Super Strength is a high-strength, two component epoxy adhesive system with longer working time. This system is tailor made where extremely high bond strength and long working time is required. It is used for bonding  for various similar and dissimilar materials such as metals, ceramics wood, leather, rubber, marble, glass etc. Bondtite Super Strength remains unaffected to mild alkalis and acids etc.; and it is also non-toxic and insulating.

Applications
Automobiles for fixing electro magnet to flywheels, bonding brake lining to shoes, plugging holes in cylinder blocks, fixing head light reflector and glass to rim, bonding metal part to miniature bulbs, for linear placement in engine, for insulating high speed motors and fixing wipers on car.

Electrical and electronics:

  • Sealing of oil filled transformer cases, fixing of magnet to metal pieces, in watt hour meter, fixing aluminium cap to glass shell, in night bulb manufacturing, bonding of cooling coils to freezers, in refrigerator, making of PCB, fixing diaphragms and magnet to the base of speaker.

Appliances:

  • Fixing name plates, bonding steel body to grinding stone in wet grinder, for assembly of mixers, washing machines, gas stoves, for fixing loose handle of tools, fixing of drains, hoses & sealing of tank joints in washing machines.

Miscellaneous:

  • For joining of marble, wash basin pieces and repairing of chipped sanitary ware, to bond concrete chips at the back of the polished granite tiles, to seal cracks in walls, for assembly of bath fitting and gate valves, as an adhesive in bangles and brassware handicrafts & in manufacturing of sports goods like tennis racket, polo stick, shuttle cock, hockey sticks etc.

Advantages
  • Long working time
  • Bonds multiple substrates
  • Solvent free
  • High strength 
How to use
  • Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth
  • Wash glass and ceramic surfaces with soap and water then rinse and let dry
  • Pre-fit parts to be joined. Squeeze equal volume of material from both part-A and part-B
  • Mix resin and hardener for one minute thoroughly and then apply as per requirement.
  • Clamp it for 24 hours
Restriction of usage
  • Does not bond to polyethylene or polypropylene plastics
  • Applications requiring short-term heat exposure of greater than 150°C
  • Continuously wet areas or water immersion
  • Potable water systems
  • Do not use on areas that will come in contact with food related items

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES