B Square Infra Solutions

• Take 2 parts resin, 1 part hardener & 8 parts filler by weight
• Mix the resin & hardener for a minute. Add 80% of the filler and mix it for 2 min. Then add balance 20% of filler and mix all the components for another 2 min to get a homogeneous paste

Product Description:
weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• Ready to mix, single component product.
• Recommended for both internal & external surfaces for wall & floor in dry & wet areas.
• Especially suited for fixing low porosity tiles and stones of regular size.
• Suitable for fixing natural stones in window jambs and door entrances.
• Highly polymer-modified: Provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
• Excellent adhesion properties, no slip is observed on vertical applications in tiles and natural stones.
• Self-curing properties, which allows for hassle-free application, with minimum labour.
• No shrinkage prevents de-bonding and gives longer life to tiles and stones.
• Low VOC for healthy living.
• Prolonged and easy workability.
• The tiled floor can be made available for foot traffic after 24 hours.
• Can be used for new construction, as well as for renovation over existing floors/facades.
• No hacking of the substrate required to achieve the bonding.
• Useful for bed thickness of 3-12 mm, may go up to 15 mm in a limited extent.

Product Details:-
weberset premier is a polymer modified, thin-set tile adhesive for ceramic tiles, in internal areas. It is suitable for both vertical (wall) and horizontal (floor) application, over the cementitious substrate. It is supplied as a dry-mix mortar, to which water needs to be added before application.

Features & benefits
• Can be used in internal areas, for floor as well as wall application.
• Low VOC - for healthy living.
• No hacking of the substrate required to achieve the required bonding.
• Self-curing properties, which allows for no-hassle application with minimum labor.
• The free-flowing product makes it easier to mix and apply.
• No sag formula: provides for hassle-free application on vertical walls, without any slippage.
• Very low shrinkage prevents debonding and gives longer life to tiles.
• Useful for bed thickness of 3-12 mm. May go upto 15mm in a limited extent.

• For grout joints between 2 mm - 12 mm.
• Easy to mix, creamy consistency high productivity grout.
• Can be applied on wall and floor.
• Highly thixotropic - non - sag formula can be used as both grout and adhesive on floor & wall.
• Easy to apply
• Early flexural properties
• High resistance to abrasion
• High Compressive strength
• Low water absorption results in watertight joints
• Resistance to stain & chemicals.
• Hygienic in service & would not allow bacterial growth
• Low VOC - Over curing full reaction takes place.
• Available in 12 widely used colors.
• Ensure proper use of personal protective equipment’s (PPE) before mixing.
• Take 4 parts resin (component A), 1-part hardener (component B), 4: 1 by weight (3.75: 1 by volume)
• Mix the components thoroughly for 2-3 minutes to get a homogeneous paste and consistent color.
• Prolonged mixing is to be avoided as it traps air and shortens pot life.
• The mixed workable grout can be used for up to 80 minutes at 250 C.
• Wash tools immediately with water before the epoxy hardens. It is very difficult to remove after it has hardened.
• In case of mixing with a mechanical mixer a slow 100 rpm mechanical mixer is recommended.
• No water to be added in the mix.

• Anti-stain properties make it suitable for maintainence - free use in residential, commercial, & hospitality sector.
• High bond strength makes it suitable for use with ceramic tile, porcelian, and vitrified tiles, large format tiles & stones, low thickness slabs, natural stone, artificial stone, etc.
• High compressive strength along with its chemical resistant properties make it suitable for industrial applications like chemical industries, laboratories, production & storage workshops, paper mills, dyeing plants, tanneries, food industries, breweries, commercial kitchens, battery rooms, workshops, dairies, & processing plants. Please refer to the chemical resistance chart in case of extreme industrial conditions.
• Resistance to bacteria & fungal growth makes it suitable for hospitals, operation theatres, clinics, swimming pool and kitchens.
• Low water absorption and resistance to a wide degree of temperature variation ensures that it can be used for wet areas, swimming pools, spas, jacuzzis, bathrooms, public toilets, and showers.
• Low abrasion or high abrasion resistance makes it suitable for usage in heavy traffic areas like subway stations, shopping malls and airport terminal buildings & even industrial use.

Description:
weberset glass mosaic is a flexible, cement-based polymer modified tile adhesive for internal and external use, especially for Glass Mosaic. It is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in dry or wet areas, including swimming pools.

It is particularly suited for areas with some movement, deflection or limited shrinkage is likely. It has the finest particle size which makes it easily workable enhancing the colours of the glass mosaic tiles. weberset glass mosaic has extended open and adjustability times making installation easier with no sagging or slippage. Being a high strength, flexible tile adhesive, it can be used for heavy-duty applications on a variety of substrates.

Features:

• Brightest white adhesive enhances the colour of glass mosaic.
• Free-flowing powder, having the long open time & prolonged workability when mixed as a paste makes it easy to install.
• No hacking required-having a high bonding strength it can be used to fix tile & stone on various substrates.
• Being self-curing it optimizes the usage of water and labour at the site.
• Being water resistant it can be used to fix various types of tiles including glass mosaics in swimming pools & other wet areas like showers, bathroom etc.
• It can sustain heat ageing.
• It has no shrinkage and is particularly suited for situations where some movement, deflection or limited shrinkage is likely.
• Absorbs dynamic loads which make it suitable to use in swimming pools where the water pressure or load may vary in a filled swimming pool and an empty swimming pool.
• Quick setting times which helps in faster construction.
• Can be used at depths up to 10 meters underwater which makes it particularly suitable for swimming pools.

Not to be used on:

• on wood or wooden conglomerates
• on metal, rubber, plastics, vinyl or linoleum surfaces
• for ceramic and vitrified tile installations when an adhesive layer thicker than 10 mm is required
• on the concrete subject to strong delayed movement, that is, with less than 6 months curing time.
• on the cementitious substrate which is not properly cured.
• on surfaces subject to vibrations.
• on plasterboard and fiberboards

Description:
weber knight armor is a two-component, high performance 100% solid epoxy based tile/stone joint filler which provides photoluminescence during the dark. It can absorb natural or household light and provide luminescence in darkness when placed between tiles and stones.

• Night Vision epoxy resin kit
• Patent Pending

Features:

• It can be used as green building products since it utilizes the natural energy to provide luminance in dark for pedestrian movement with a high aesthetic appeal.
• The non-sag formula for wall & floor applications.
• High bonding strength with tiles and stones.
• Joints with weber knight armor are resistant to most of the commercial tile & stone cleaners.
• Non-absorbent i.e. water-resistant joints prevent the growth of fungus and bacteria.
• Two components, ready to mix, ensure consistent quality of grouts.
• Very low shrinkage and high resistance to cracks.
• Easy to mix, creamy consistency, faster in application and ease in cleaning to get smooth & decorative finish.
• Excellent chemical & stain resistance properties.
• High mechanical strength allows usage in high foot traffic areas, open parking & vehicle movement.
• It can be applied in between the tile & stone under submerged condition due to its water-resistance properties.
• It can also be used as adhesive for fixing transparent glass tiles & blocks.
• Minimum exposure of light intensity at joints required from 300-1000 lux to get visible luminance for more than 5–8 hours and luminance been tested as per international standard.
• High translucence with coated pigment increases the chromatic effect resulting in the highly aesthetic and decorative finish.

• Minimum joint width of 1 mm.
• Maximum joint width of 7 mm in vertical and 14 mm in horizontal.
• Not to be used in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
• At least 7 days after grouting for acid cleaning & submerged conditions.
• The luminance performance would be affected if the joints are not exposed to daylight or household light.
• The joints look white during day time irrespective of the colour of the tile.

• Internal and external use.
• Highly polymer-modified: provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
• Can be used for new construction, as well as for renovation over existing floors/facades.
• Long open time.
• Prolonged and easy workability.
• Low VOC - for healthy living.
• No Hacking of substrate required to achieve the required bonding.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• The free-flowing product makes it easier to mix and apply.
• No-sag formula: allows for hassle-free application on vertical walls, without any slippage.
• Water-resistant, making it suitable for swimming pools, bathrooms, kitchen, saunas, and spa.
• Sustains heat ageing, making it ideal for high-temperature locations for outdoor use, and also for hot temperature applications, like Jacuzzi, sauna etc.
• No shrinkage prevents debonding and gives longer life to tiles and stones.
• Absorbs dynamic load.
• Useful for bed thickness of 3 - 12 mm. May go up to 15 mm in a limited extent.

• Glitter component is premixed to avoid mixing at the site. This results in consistent, uniform & highly aesthetically finished joints.
• The glittering effect is higher due to reflective filler & transparent resin enhances decorative and durable joints.
• Easy to mix with a creamy consistency which helps in faster application and ease in cleaning.
• Available in attractive & decorative colours.
• High sag resistance formula and thixotropic. Can be used for both floor & wall applications.
• Excellent stain & chemical resistance properties.
• Very low in shrinkage and high resistance to cracks.
• Non-absorbent and water-resistant joints prevent the growth of bacteria and fungus.

• Minimum joint width of 1 mm.
• Maximum joint width of 7 mm in vertical and 14mm in horizontal.
• Do not use the grouts in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
• At least for 7 days after grouting for acid cleaning & submerged conditions

weberfix PU's polyurethane formulation provides high flexibility which makes it the best choice for:

• Tiles and stones prone to water absorption and thermal expansion
• Absorbent and nonabsorbent deformable substrates like wood, metals, rubber, PVC, linoleum, asphalt etc.
• Heated subfloors and in areas subject to thermal shock and freezing
• No spacer required *

weberfix PU provides much-needed flexibility for building world-class architectural designs by removing constraints in terms of substrate and tile types. From any tile to any substrate, weberfix PU can handle it all.

Features
• For grout joints between 2 mm - 12 mm.
• Easy to mix, creamy consistency high productivity grout.
• Can be applied on wall and floor. • Highly thixotropic - non - sag formula can be used as both grout and adhesive on floor & wall. • Easy to apply
• Early flexural properties • High resistance to abrasion
• High Compressive strength

• Low water absorption results in watertight joints
• Resistance to stain & chemicals.
• Hygienic in service & would not allow bacterial growth
• Low VOC - Over curing full reaction takes place.
• Available in 12 widely used colors

• Moisture free system: Does not damage wooden substrates or tiles, and water sensitive stone.
• Very High Bond strength 2 Component adhesive: prevents wastage, as the only quantity which is required has to be mixed.
• Easy to use
• Fast Setting
• Can do cladding up to 50 ft. height, without any supporting bracket*.
• Under tile treatment of stone (to prevent discolouration) is not required.
• Can be used for fixing moisture sensitive stones, like green marble.
• Reaction bases system, and thus not harshly affected by temperature & humidity.
• Can be used on touch dry surface of the concrete. Do not need to wait for the substrate to get completely dry.
• For fixing tiles and stones on drywall & plywood.

Description:
weberset firm is a highly polymer modified, high-performance thin-set adhesive, for tiles, mosaics and stones, on a variety of surfaces, for both vertical and horizontal application, in indoor as well as outdoor use. It is supplied as a dry mix mortar, to which water needs to be added before application.

Features:

• Internal and external use.
• Highly polymer-modified: provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
• Can be used for new construction, as well as for renovation over existing floors/facades.
• Long open time.
• Prolonged and easy workability.
• Low VOC - for healthy living.
• No Hacking of substrate required to achieve the required bonding.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• The free-flowing product makes it easier to mix and apply.
• No-sag formula: allows for hassle-free application on vertical walls, without any slippage.
• Water-resistant, making it suitable for swimming pools, bathrooms, kitchen, saunas, and spa.
• Sustains heat ageing, making it ideal for high-temperature locations for outdoor use, and also for hot temperature applications, like Jacuzzi, sauna etc.
• No shrinkage prevents debonding and gives longer life to tiles and stones.
• Absorbs dynamic load.
• Useful for bed thickness of 3 - 12 mm. May go up to 15 mm in a limited extent.

• Do not use on wet screed or plaster. The surface must be fully cured.
• Do not use on gypsum plaster or boards, fibre cement boards, or other drywall partitions.
• Can only be used on cementitious waterproofing. Don’t use on epoxy or polyurethane waterproofing.
• Do not use for Installing glass tiles or metal tiles. Use only Weber bond poxy, for fixing glass and metal tiles.
• Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact weber representative for fixing these.
• Do not use on surfaces subject to vibrations. Use weberset flex for vibration prone areas.
• Do not use for fixing artificial stone or impregnated stone. Use weberset ultra for the same.

Additional Information:

• Delivery Time: 1 to 2 days
• Packaging Details: • Weather resistant • Colour fast • Easy application and clean up. • Easy maintenance • Non-cracking & Non-shrink • Complies with ANSI A 118.6, EN 13888, standards. • Water and shock resistant.

• For fixing tiles & stone on demanding external & internal applications
• Polymer modified super flexible adhesive with superior bond strength
• High performance in all types of weather
• Single component - Just add water